Epson Stylus Photo RX520 Series, Руководство по эксплуатации

Страница: 16 / 32

16 Making Prints From Slides or Negatives
Making Prints From Slides or Negatives
You can use the film holder that came with your
EPSON STYLUS PHOTO RX to scan 35-mm slides and
strips of negatives or positive film. You can then print
directly from the scanned images.
To get professional results that look and feel like
traditional photos, try one of the special Epson photo
papers listed on page 4.
See these sections:
■
“Removing the Document Mat and Film Holder”
on page 16
■
“Placing 35-mm Slides in the Holder” on page 17
■
“Placing 35-mm Film Strips in the Holder” on
page 17
■
“Printing Snapshots” on page 18
c
Caution:
Make sure you handle film or negative strips by the edges or wear
gloves. Touching the film surface with bare hands can leave
fingerprints or other marks on the film.
Removing the Document Mat
and Film Holder
1. Open the document cover and remove the
document mat.
2. If you have stored the film holder in the document
cover, remove it as shown.
3. Place your film in the holder as described on the
following pages.