Epson Stylus CX4100 Series, Руководство пользователя

Страница: 124 / 127

128
■
If you use an extension cord with the Stylus CX, make sure the total ampere
rating of the devices plugged into the extension cord does not exceed the cord’s
ampere rating. Also, make sure the total ampere rating of all devices plugged into
the wall outlet does not exceed the wall outlet’s ampere rating.
■
Avoid locations that are subject to rapid changes in heat or humidity, shocks or
vibrations, or dust.
■
Leave enough room around the Stylus CX for sufficient ventilation. Do not block
or cover openings in the Stylus CX case or insert objects through the slots.
■
Do not place the Stylus CX near a radiator or heating vent or in direct sunlight.
■
Place the Stylus CX on a flat, stable surface that extends beyond its base in all
directions. It will not operate properly if it is tilted or at an angle.
■
Make sure the back of the Stylus CX is at least 10 cm (3.9 in.) away from the wall.
■
Do not open the scanner section while the Stylus CX is copying, printing, or
scanning.
■
Do not spill liquid on the Stylus CX.
■
Except as specifically explained in your documentation, do not attempt to service
the Stylus CX yourself.
■
Unplug the Stylus CX and refer servicing to qualified service personnel under the
following conditions: if the power cord or plug is damaged; if liquid has entered
the product; if the product has been dropped or the case damaged; if the product
does not operate normally or exhibits a distinct change in performance. Adjust
only those controls that are covered by the operating instructions.
■
When storing or transporting the Stylus CX, do not tilt it, stand it on its side, or
turn it upside down; otherwise ink may leak from the cartridge.
■
The lamp in this product contains mercury. Dispose of according to local, state,
or federal laws.
Ink Cartridge Safety Instructions
■
Keep ink cartridges out of the reach of children and don’t drink the ink.