Epson Stylus CX3500 Series, Краткое руководство пользователя

Страница: 94 / 101

Notices
43
Notices
Important Safety Instructions
Before using your Stylus CX, read and follow these safety instructions:
■
Be sure to follow all warnings and instructions marked on the Stylus CX.
■
Use only the type of power source indicated on the Stylus CX label.
■
Use only the power cord that comes with the Stylus CX. Use of another cord may cause fires or
shock. Do not use the cord with any other equipment.
■
Connect all equipment to properly grounded power outlets. Avoid using outlets on the same
circuit as air control systems or other high-load devices that regularly switch on and off or are
controlled by wall switches or automatic timers.
■
Place the Stylus CX near a wall outlet where the plug can be easily unplugged.
■
When connecting the Stylus CX to a computer or other device with a cable, ensure the correct
orientation of the connectors. Each connector has only one correct orientation. Inserting a
connector in the wrong orientation may damage both devices connected by the cable.
■
Do not let the power cord become damaged or frayed.
■
If you use an extension cord with the Stylus CX, make sure the total ampere rating of the
devices plugged into the extension cord does not exceed the cord’s ampere rating. Also, make
sure the total ampere rating of all devices plugged into the wall outlet does not exceed the wall
outlet’s ampere rating.
■
Keep your Stylus CX and computer system away from potential sources of electromagnetic
interference, such as loudspeakers or cordless telephone base units.
■
Avoid locations that are subject to rapid changes in heat or humidity, shocks or vibrations, or
dust.
■
Leave enough room around the Stylus CX for sufficient ventilation.
■
Do not place the Stylus CX near a radiator or heating vent or in direct sunlight.
■
Place the Stylus CX on a flat, stable surface that extends beyond its base in all directions. It will
not operate properly if it is tilted or at an angle.
■
Do not open the scanner section while the Stylus CX is copying, printing, or scanning.
■
Turn off and unplug the Stylus CX before cleaning. Clean with a damp cloth only. Do not spill
liquid on it.
■
Always turn the Stylus CX off using the
P On
button. Don’t turn off the power using a switch
on a power strip or unplug the Stylus CX until the
On
light is off.
■
Do not block or cover openings in the Stylus CX case or insert objects through the slots.
■
Except as specifically explained in your documentation, do not attempt to service the Stylus CX
yourself.
4049978_b0_00.book Page 43 Thursday, July 22, 2004 3:47 PM