Insert an envelope into the manual feed slot with the wide
end at the top entering the printer first and the printable
side face-up until it meets resistance. The printer loads the
envelope to the print position automatically.
Now give your print command. The printer ejects the
envelope automatically when it is finished printing.
Note:
Make sure your application program keeps the printing entirely
within the printable area of the envelope. For a description
of
the
printable urea, see the Appendix.
Use envelopes only under normal temperature and humidity
conditions.
the ink is not drying enough, try removing envelopes one
at a time as they finish printing.
When you switch back to the paper feeder, move the
paper-thickness lever back to its normal position. To do this,
first press the
button to turn the
Pause
light on. Next
hold down the
Replace ink
button until the carriage
moves to the middle position. Then turn the paper-thickness
lever all the way to the left (counterclockwise).
Using Other Printer Functions 2-5
