Epson SC-T3100 Series, Руководство пользователя

Страница: 110 / 178

Settings item Settings value Explanation
Platen Gap 1.6 Displayed when in Paper Type , Custom Paper is selected. When
registering Custom Paper, this is the Platen Gap (distance between
print head and paper) for the paper selected in
Change Reference
Paper , therefore this does not normally need to be changed.
Change to a wider setting (a higher value) if print results are
smeared.
2.1
2.6
Top/Bottom Margins
Standard
* Setting this to Standard will set the top/bottom margins as follows
depending on the printer driver print targets.
❏
CAD/Line Drawing: 3 mm/3 mm
❏
Other: 30 mm/30 mm
Left and right margins will remain at 3 mm regardless of settings. If
there is any soiling to the top section of the print results, then try
increasing the top margin before printing.
U
“Printable area” on page 163
Top 3 mm/Bottom
3 mm
Top 15 mm/
Bottom 15 mm
Top 45 mm/
Bottom 15 mm
Back Tension Auto If there is any wrinkling on the paper during printing, set this to
High or Extra High .
Standard
High
Extra High
Drying Time
Drying Time per Pass 0.0 to 10.0
seconds (0.0
*
)
Select the time the print head pauses to allow drying after each
pass. Choose from values between 0.0 and 10.0 seconds.
Depending on the paper type, the ink may take a while to dry. If the
ink blurs on the paper, set a longer time for drying the ink.
Increasing the drying time increases the time needed to print.
Drying Time per Page 0.0 to 60 minutes
(0.0
*
)
Specify how long the printer pauses to allow the ink to dry after
printing each page; choose from values between 0.0 and 60
minutes. Depending on the ink density or paper type, the ink may
take a while to dry. If the ink blurs on the paper, set a longer time
for drying the ink. The longer the drying time, the more time
required for printing.
Auto Cut
On
* Choose On to automatically cut roll paper using the built-in cutter
as each page is printed or Off to disable auto paper cutting. Setting
this to On automatically cuts the edge when the edge is not a
horizontal cut when setting paper. The setting selected with the
printer driver takes priority when the printer driver is used.
U
“Cutting the Roll Paper” on page 30
Off
Manage Remaining Amount
SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series User's Guide
Using the Menu
110