EN
Assembly
TC
組裝
[ [ [
While checking the positions of the two lines on the front side of the printer, perform the adjustment. Turn the adjustment
screw clockwise to move the drawn line back, and turn it counterclockwise to move the drawn line forward. The line is
moved by approx. 1 mm with each turn of the screw. When the drawn line reaches the position of the broken line, the
adjustment is completed.
在印表機正面確認兩條線的位置的同時進行調整。順時針旋轉調整螺絲可向後移動所畫的線，逆時針旋轉可向前移
動所畫的線。每旋轉一次螺絲，所畫的線將被移動約
1 mm
。當所畫的線到達虛線的位置時，表示調整完成。
[ [ [
[ [ [
Fully tighten the four screws that you provisionally tightened.
完全鎖緊您之前暫時旋緊的
4
個螺絲。
[[
