EN
Loading Media
TC
裝入材料
[ [[ [
[ [[ [
[ [2 [
c
Pull out the media until the right end is paralleled with the scale marks on the two labels.
向外拉動材料，直至右側與兩個標籤上的刻度線平行。
c
If the left end of the media is not at the center of the
rectangular area as shown in the figure on the right,
return to step [4].
若材料的左側未如右圖所示置於長方形區域的中間位
置，請返回步驟
[4]
。
[ [ [
25
