EN
Loading Media
TC
裝入材料
[ [ [
If the handle shaft of the right side roll holder is pressed in,
turn it to the front until the handle can no longer be turned.
若右側滾筒支撐架的把手軸被壓入，請將其往您的方向旋
轉直至把手無法再轉動。
[ [ [
[ [ [
Turn the handle until part A in the upper left figure is hidden.
Once part A is hidden, do not turn the handle any further.
轉動把手直到左上圖中上的
A
部位隱藏起來。
一旦
A
部位被隱藏，請不要再繼續轉動把手。
[ 5 [
If the roll of media has the outer diameter which is less than 140mm, lift it up by your hands, and set it to the roll holder.
若材料滾筒的外徑小於
140 mm
，請用手將其抬起並裝入滾筒支撐架。
24
