EN
Assembly
TC
組裝
[ 4 [
Pull the adjustment paper to the left end of the roll core, insert it into the printer, and then place it over the platen while it is taut. Align
a ruler with the front side of the white line and draw a line with a pen.
將調整用紙拉向紙軸的左側並插入印表機，然後把處於拉緊狀態的調整用紙置於壓盤上。將直尺對齊正面的白線，然後用筆劃
一條線。
[ 5 [
Pull out the adjustment paper, pull it to the right end of the roll core, insert it into the printer, and then feed it all inside.
拉出調整用紙並拉向紙軸的右側，然後插入印表機並且完全饋入內部。
[ [ [
Check the positions of the white line on the platen and the line you drew in step [4] while the adjustment paper is taut. If the
line you drew is not aligned with the white line as shown in the figure on the right, go to step [7]. If the lines are aligned, go to
step [8].
檢查壓盤上白線的位置以及當調整用紙處於拉緊狀態時您在步驟 [
4
] 中所畫線的位置。如右圖所示，若您所畫的線未與
白線對齊，請進入步驟 [
7
]。若已對齊，則進入步驟 [
8
]。
[[
