Epson S5U1C63000A, Руководство пользователя

Страница: 248 / 346

CHAPTER 8: DEBUGGER
234
EPSON
S5U1C63000A MANUAL
(S1C63 FAMILY ASSEMBLER PACKAGE)
xfcp/xfcps
(xilinx fpga data compare)
Function
This command compares the contents between the FPGA and the specified file.
Format
>xfcp <file name> ;{H | S}
↵
for main FPGA (direct input mode)
>xfcps <file name> ;{H | S}
↵
for sub FPGA (direct input mode)
<file name>: FPGA data file (.mot: Motorola S, .mcs: Intel HEX)
H:
Intel HEX file
S: Motorola S file
Examples
>xfcp ..\ice\fpga\c63xxx.mot ;S
↵
>
...No error has occurred.
>xfcp ..\ice\fpga\c63yyy.mot ;S
↵
Warning : Verify error
...Verify error has occurred.
0X00000 0XFF
...Error addresses and data in the FPGA are displayed.
0X00001 0X84
0X00002 0XAB
: :
>
Notes
• Data is verified only within the valid address range in the specified file. If the FPGA contains data
outside the range, it is not verified.
• Use the file provided by Seiko Epson as the data to be compared without modifying the contents. Also
the file extension cannot be changed as it is .mot (Motorola S) or .mcs (Intel HEX). Specifying an
illegal file results in an error and data cannot be written.
Error : cannot open file
• A dialog box appears to show the progress while executing. To abort execution, click the [Cancel]
button on the dialog box or press the [ESC] key. When the execution stops, the warning message
shown below is displayed.
Warning : User cancel
GUI utility
None