Chapter 4 Technical Description
S5U13515P00C100 Evaluation Board User Manual (Rev 1.1)
EPSON
23
4.10 PWM Connector
The S2D13515 Display Controller has two PWM outputs which are available on connector H9. The other pins on
connector H9 are used to connect the external power supplies to CM1VDD, IOVDD, PIO1VDD, and PIO2VDD, if
a voltage level different than 3.3V is required. Note that connector H9 is not populated on the S5U13515P00C100
evaluation board.
Connector H9 is a 0.1” x 0.1”, 10-pin header (5x2). The following figure shows the location of the connector H9.
Figure 4-8: PWM Connector Location (H9)
For the pinout of connector H9, see Section Chapter 6, “Schematic Diagrams” on page 29.