Chapter 3 Installation and Configuration
S5U13515P00C100 Evaluation Board User Manual (Rev 1.1)
EPSON
13
JP9 - PIO2VDD Source
JP9 is used to select the source for the PIO2VDD supply voltage.
When the jumper is at position 1-2, the PIO2VDD voltage must be provided to pin 10 on the H9 connector.
When the jumper is at position 2-3, the PIO2VDD voltage is provided by the 3.3V power supply of the board.
Figure 3-6: Configuration Jumper Location (JP9)
JP12 - CM1VDD Source
JP12 is used to select the source for the CM1VDD supply voltage.
When the jumper is at position 1-2, the CM1VDD voltage must be provided to pin 8 on the H9 connector.
When the jumper is at position 2-3, the CM1VDD voltage is provided by the 3.3V power supply of the board.
Figure 3-7: Configuration Jumper Location (JP12)