Setting items
Value
Explanation
Target Pace
SETTING 01 to 03
Set the target time and pace range for one kilometre/
mile. An alarm sounds if you are outside the set pace
range.
You can set three target paces within the following
range.
Target Pace: 1'00" to 15'00"/km or miles (in increments of
1 second)
Pace Range: 00'05" to 03'00"/km or miles (in increments
of 1 second)
U
“Setting a Pace and Measuring (Target Pace
OFF (default)
HR
ON (default)
You can measure pulse (heart rate) with the built-in
sensor.
U
“Measuring Pulse (Heart Rate) during Exercise” on
OFF
Alarm
Tones
Set the alarm type and time (1 to 10 minutes).
You can also set this from
Sys. Settings
.
Vib. (vibration)
Tones & Vib. (vibration)
(default)
OFF
Tap
(Only for the
measurement screen)
Lap
You can perform one of the operations set here by
tapping the screen until the alarm sounds while
measuring.
When
Bike
is selected as the
Activity Type
, the tap
function may operate automatically depending on the
condition of the road surface. If this occurs, we
recommend to change the setting to
OFF
.
U
Light
Screen Chg.
OFF (default)
GPS
-
Displays the number of GPS satellites being accessed.
Screen
Screen1
You can display up to four measurement screens. You
can change the screen pattern and the measurement
items displayed for each screen.
You can also change the
Display Lap Screen
, but this is
not displayed for the interval function.
U
Screen2
Screen3
Screen4
Display Lap Screen
SF-810 User Manual
Settings
94
Содержание Runsense SF-810
Страница 1: ...User Manual GPS Sports Monitor ...
Страница 90: ...How to Change the Settings SF 810 User Manual Settings 90 ...
Страница 126: ...Icon Name Setup from the external device SF 810 User Manual Appendix 126 ...
Страница 132: ...www epson eu runsense 412842700 2014 Seiko Epson Corporation All rights reserved GPS Sports Monitor ...