Epson PR9, Руководство пользователя

Страница: 211 / 269

Appendix C IBM ProPrinter X24 and IBM ProPrinter II Commands
C-24
C.2.7.2 Alternate Graphics Mode (AGM) (ProPrinter X24)
As well as the graphic modes described in the previous section, the printer can also print
Epson LQ-800/LQ-1000 compatible graphics, using the Alternate Graphics Mode (AGM)
feature.
When the Alternate Graphics Mode feature is selected during the SETUP (
AGM : YES
),
the values of command codes ESC 3 , ESC J , and ESC A are altered with respect to their
standard functions, and the command code ESC * is activated.
S
ESC 3
n
: Line feed = n/180"
S
ESC A
n
: Line feed = n/60"
S
ESC J n : One line feed of n/180" (for graphics)
S
ESC *
m
... : AGM graphics mode
ESC 3
n
(IBM ProPrinter X24)
Line Feed - n/180 Hexadecimal code: 1B 33
n
n
= 1 - 255
If the parameter
AGM : NO
has been selected in the SETUP ,it sets the n/216"
(0,1176 x n mm) line feed;
If the parameter
AGM : YES
has been selected in the SETUP ,it sets the n/180"
(0,141 x n mm) line feed.
This is the line feed recommended for graphic printing (BIM). If programmed to 24/216", it
ensures that the various lines in 8-needle graphic printing meet perfectly.
It remains valid until a new line feed command is received.
To obtain precise line feeds, always use multiples of 3 for parameter
n
.
ESC A
n
(IBM ProPrinter X24)
Line Feed - n/60" Hexadecimal code: 1B 41
n
n
= 1 - 85
If the parameter
AGM : NO
has been selected in the SETUP ,it sets the n/72" (0,3528 x n
mm) line feed; If the parameter
AGM : YES
has been selected in the SETUP ,it sets the
n/60" (0,432 x n mm) line feed.
It will only be executed when the command ESC 2 is received. Until then, the current line
feed remains valid.
Note:
n
= 0 does not change the current line feed.