Epson PR9, Руководство пользователя

Страница: 197 / 269

Appendix C IBM ProPrinter X24 and IBM ProPrinter II Commands
C-10
ESC J
n
(IBM ProPrinter X24)
One Line Feed of n/216" or n/180" Hexadecimal code: 1B 4A
n
n
= 1 - 255
Prints the buffer and feeds the paper line feed.If the parameter
AGM : NO
has been
selected in the SETUP , the paper line feed by n/216"; If the parameter
AGM : YES
has
been selected in the SETUP , the paper line feed by n/180".
It also executes a carriage return, if the parameter
LF + CR : YES
has been selected in
the SETUP.
The value of
n
must be a multiple of 3 (minimum line feed). In 8-needle graphic printing,
the value 24/216" ensures that the lines meet perfectly.
ESC J
n
(IBM ProPrinter II)
One Line Feed of n/216" Hexadecimal code: 1B 4A
n
n
= 1 - 255
Prints the buffer and feeds the paper by n/216". It also executes a carriage return, if the
parameter LF + CR = YES has been selected in the SETUP.
In 8-needle graphic printing, the value 24/216" ensures that the lines meet perfectly.
ESC ]
Line Feed Backward Hexadecimal code: 1B 5D
Prints the current line and executes a line feed backward of a value determined by the
vertical spacing selected.
If the parameter LF + CR = YES has been selected from the Set-Up, the printing position
is set at the left margin.
ESC [
c1 c2 t1 t2 n1 n2
IBM ProPrinter X24 only
Line Feed Value Modification Hexadecimal code: 1B 5B 5C
c1 t2 n1 n2
Modifies the values of codes ESC J and ESC 2 as n/ 216” or n/180”.
Parameters
c1, c2, t1, t2
and
n1
have the following fixed decimal values: 4, 0, 0, 0, and 0.
Parameter
n2
has the decimal value: 180 or 216.