Epson LQ-300 - Impact Printer, Руководство по обслуживанию

Страница: 29 / 119

Service Manual Product
6.
7.
8.
9.
10.
Table 1-19. Default Options
Font 1 Light Font 2 Light Pause Light Setting
Go to
Submenu
Blinks OFF OFF Character table
1-20
Blinks ON OFF Page
Table 1-21
OFF Blinks OFF Skip over perforation
1-22
ON
OFF Auto tear-off
1-22
OFF ON Graphic print direction
1-23
ON ON
Software
1-24
OFF ON
AGM 1-22
ON ON Auto line feed
1-22
OFF
Blinks
interface
Table 1-25
ON
Blinks Bit rate 1-26
OFF Parity bit
Table 1-27
ON
Blinks Data
1-28
Blinks 1-22
,
Blinks OFF State reply
1-22
When
you reach the setting you want to change, press the
Pause
button once. The printer
automatically enters the submenu for that setting.
Press the
Font
button to move the through the settings in the submenu. printer beeps
twice each time you press the
Font
button while in a submenu.
When the lights match your desired setting, press the Pause button to make your selection.
The printer saves the new setting and returns to the menu shown above.
Repeat steps 5 through 8 for each additional setting you want to change, or skip to step 10 to
exit the printer’s default setting mode.
When you are finished, turn the printer off. Any settings you have made remain in effect until
you change them
again.
Table 1-20. Character Tables
Font 1 Light Font 2 Light Pause Light
Standard
NLSP
OFF
OFF OFF 437
437
ON
OFF OFF
PC 850
Pc 650
OFF
ON
OFF Pc 860 PC 864
ON ON OFF PC 863
PC 437 Greek
OFF OFF ON PC 865 Pc 652
ON OFF ON Pc 861
PC 853
OFF
ON ON
PC 855
ON ON ON
PC 857
OFF OFF Blinks
—
Pc 866
ON OFF Blinks
—
PC 869
OFF ON Blinks
—
Latin IT
ON ON Blinks
—
8859-7
OFF Blinks Blinks
—
Code MJK
ON Blinks Blinks
—
Mazowia
Blinks Blinks Blinks
—
Bulgaria
Rev.
1-21