Epson LQ-1010, Руководство пользователя

Страница: 117 / 308

Graphics
Below is the BASIC program that prints the design shown on the
previous pages. Note that the data numbers in lines 80 through
140
are
the same numbers that are at the bottom of each section in the last
illustration. The WIDTH statement in line
10
is for IBM PC BASIC; the
WIDTH statement format may be different for your system.
10
20
30
40
50
60
70
80
90
WIDTH
"LPT1:",255
LPRINT
CHR$;(27)"*"CHR$(39)CHR$(42)CHR$(0);
FOR X=1 TO 126
READ N
LPRINT CHR$(N);
NEXT X
LPRINT
DATA 0,0,63,0,0,127,0,0,255,0,3,255,0,15,255,0,31,255
DATA 0,127,255,0,255,255,1,255,3,255,255,7,255,255,l5,
255, 255
100 DATA
31,255,254,31,255,252,31,255,255,248,31,255,240,31,255,
224,31,255,192
110 DATA
31,255,0,31,252,0,31,240,0,31,224,0,31,128,0,31,240,0
120 DATA
31,255,192,28,255,224,28,l27,240,28,l5,248,30,0,252,
31,0,126
130 DATA
15,128,15,7,192,7,3,240,7,1,254,7,0,255,7,0,127,135
140 DATA 0,31,199,0,7,231,0,1,247,0,0,255,0,0,127,0,0,63
In this program, line 20 assigns the graphics option (24pin
triple-density) with code 39. Code
42
sets the number of pin columns at
42.
Lines 80 through
140
contain
126
bytes of data (42-pin columns x 3
bytes) for each pin column. Lines
30
through
60
print the design that
you see below:
4-18
Software and Graphics