Epson Expression 10000XL Series, Руководство по обслуживанию

Страница: 33 / 89

Expression 10000XL Revision A
DISASSEMBLY/ASSEMBLY Overview 33
4.1 Overview
This chapter explains the procedures for disassembling the major units and parts of the
product. Unless otherwise explained, reassembly should be carried out in the reverse
order of the disassembly procedure. When you have to remove any units or
components that are not described in this chapter, refer the exploded diagram in the
Appendix. Before starting disassembly, always read the precautions described in the
next section.
4.1.1 Precautions
Before starting the disassembly or reassembly of the product, always read the
following precautions given under the headings "WARNING" and "CAUTION".
W A R N I N G
„
Before disassembling or reassembling this product, always
disconnect the Power Cable and Interface Cable. However,
when you have to work with power ON for voltage
measurement, etc., use extreme care not to get an electric shock
and do the work in accordance with the procedure given in this
manual.
„
To prevent your hands from being cut by sharp edges, always
wear gloves before starting disassembly/reassembly.
„
When touching any internal components, use a static electricity
discharger such as anti-static wrist straps, and handle them
carefully to protect the microprocessors and circuits.
C A U T I O N
„
Provide sufficient work space for disassembling and
reassembling.
„
Always use only the recommended tools for disassembly,
reassembly and adjustment.
„
Be sure to tighten the screws to the specified torque.
„
Use the specified grease for lubrication. (Refer to Chapter 6 for
details)