220
Print Head Alignment
If your printouts become grainy or blurry, you notice misalignment of vertical lines, or you see dark or
light horizontal bands, you may need to align the print head.
Note:
Banding may also occur if your print head nozzles need cleaning.
Aligning the Print Head Using the Product Control Panel
Parent topic:
Aligning the Print Head Using the Product Control Panel
You can align the print head using the control panel on your product.
1.
Make sure there are no errors on the LCD screen and the output tray is extended.
2.
Load a few sheets of plain paper in the product.
3.
Press the
home button, if necessary.
4.
Select
Maintenance
.
5.
Select
Print Head Alignment
.
6.
Select one of the following options:
•
Ruled Line Alignment
if straight lines are slanted or misaligned.
•
Vertical Alignment
if there are vertical gaps or lines in patterned areas.
Содержание ET-4760
