Epson EPL-7000, Руководство пользователя

Страница: 182 / 330

Printing Problems
Problem
Solution
The position of the
printout is not what
you expect.
The printed page
length differs from
the actual length of
the paper.
The right or left
margin setting does
not match the
actual width of the
paper.
Even after changing
the page length or
margin positions,
you find that the
printed position is
not correct.
The SelecType form length setting may not
be correct or your software may be
overriding this setting. Check the page
length setting in your application program
and make sure that it is set correctly for
the selected page length. You can also
change the page length with SelecType
options. The procedure for setting the page
length varies depending on the printer
mode that you are using. See the SUB
CONFIG option in Chapter 3.
The margin settings of your software
program may not be correct. Change the
settings of your application program. If
this does not correct the problem, you can
change the right or left margin with
SelecType. The procedure for changing
margin settings varies depending on the
selected operating mode. See Chapter 3 or
Appendix C.
You may need to set the absolute printing
position with the T-OFFSET or L-OFFSET
option in the SYSTEM CONFIG menu of
SelecType Level 1. This feature allows you
to adjust the position of the printable area
on the page. See Chapter 3 for more
information on using this feature.
Troubleshooting 7-25