Epson EB-S04, Руководство пользователя

Страница: 140 / 166

140
Solving Image or Sound Problems
• "Correcting the Image Shape with Quick Corner" p.43
a
Open the
System Preferences
utility and select
Displays
.
• Check your computer display settings to disable dual display and set the
resolution within the projector's limits. (See your computer manual for
b
Select the
Display
or
Color LCD
option, if necessary. details.)
• Check the resolution assigned to your presentation files to see if they are
c
Click the
Arrange
or
Arrangement
tab.
created for a different resolution. (See your software help for details.)
• Make sure you selected the correct projection mode. You can select
Front
,
d
Select
Mirror Displays
.
Front/Ceiling
,
Rear
, or
Rear/Ceiling
as the
Projection
setting in the
projector's
Extended
menu.
g g
Related Links
Solutions When "Not Supported" Message Appears
• "Input Signal Settings - Signal Menu" p.103
If the message "Not supported" is displayed, try the following solutions:
• "Projector Setup Settings - Extended Menu" p.107
• "Supported Monitor Display Resolutions" p.153
• Make sure the correct input signal is selected on the projector's
Signal
menu.
• Make sure the computer's display resolution does not exceed the projector's
Solutions When the Image is not Rectangular
resolution and frequency limits. If necessary, select a different display
If the projected image is not evenly rectangular, try the following solutions: resolution for your computer. (See your computer manual for details.)
• Place the projector directly in front of the center of the screen, facing it
g g
Related Links
squarely, if possible.
• "Input Signal Settings - Signal Menu" p.103
• If you adjusted the projector height using the projector feet, press the
keystone buttons on the projector to adjust the image shape.
Solutions When Only a Partial Image Appears
• Turn on horizontal keystone slider in the projector's Settings menu. Then,
adjust the slider until the image is evenly rectangular.
If only a partial computer image appears, try the following solutions:
s
Settings
>
Keystone
>
H/V-Keystone
>
H-Keystone Adjuster
• Press the [Auto] button on the remote control to optimize the image signal.
• Turn on automatic adjustment in the projector's
Settings
menu. The
• Try adjusting the image position using the Position setting in the
projector automatically corrects the image every time you move the
projector's
Signal
menu.
projector.
• Press the [Aspect] button on the remote control to select a different image
s
Settings
>
Keystone
>
H/V-Keystone
>
Auto V-Keystone
aspect ratio.
• Adjust the Quick Corner setting to correct the image shape.
• Change the Resolution setting in the projector's Signal menu according to
s
Settings
>
Keystone
>
Quick Corner
the signal for the connected equipment.
g g
Related Links
• If you zoomed into or out of the image using the [E-Zoom] buttons, press
• "Auto V-Keystone" p.41
the [Esc] button until the projector returns to a full display.
• "Correcting the Image Shape with the Keystone Buttons" p.42