Epson EB-940H Скачать руководство пользователя страница 134

Страница: 134 / 181

When the Indicators Provide No Help

If any of the following problems occur and the indicators do not offer a
solution, refer to the pages given for each problem.

Problems Relating to Images

•

No images appear

Projection does not start, the projection area is completely black,
or the projection area is completely blue.

p.135

•

Moving images are not displayed

Moving images being projected from a computer appear black
and nothing is projected.

p.136

•

Projection stops automatically

p.136

•

The message "Not supported" is displayed

p.136

•

The message "No Signal" is displayed

p.137

•

Images are fuzzy, out of focus, or distorted

p.137

•

Interference or distortion appear in images

p.138

•

The mouse cursor flickers (only when projecting USB Display)

p.139

•

The image is truncated (large) or small, the aspect ratio is not
suitable, or the image has been reversed

Only  part  of  the  image  is  displayed,  the  height  and  width  ratios
of  the  image  are  not  correct,  or  the  image  may  appear  reversed
from  top  to  bottom  or  left  to  right.

p.139

•

Image colors are not right

The whole image appears purplish or greenish, images are black
& white, or colors appear dull.

p.140

•

Images appear dark

p.140

Problems when projection starts

•

The projector does not turn on

p.141

Other Problems

•

No sound can be heard or the sound is faint

p.142

•

There is noise in the audio

p.142

•

No sound can be heard from the microphone

(EB-955WH/

EB-950WH/EB-965H/EB-945H/EB-940H/EB-98H/EB-97H only)

p.143

•

The remote control does not work

p.143

•

I want to change the language for messages and menus

p.143

•

Mail is not received even if a problem occurs in the projector

p.144

•

Cannot change settings using a Web browser

p.144

Problem Solving

134

Содержание EB-940H






















































































































































































Результаты поиска

Содержание EB-940H

Отзывы:

Бренды по названию

Популярные бренды

Epson EB-940H, Руководство пользователя

Результаты поиска

Содержание EB-940H

Отзывы:

Бренды по названию

Популярные бренды