Epson EB-940H, Руководство пользователя

Страница: 107 / 181

Submenu Function
Display
You can make settings related to the projector's display.
Messages : When set to Off , the following items will not be
displayed.
Item names when the Source, Color Mode, or Aspect Ratio
is changed, messages when no signal is being input, and
warnings such as High Temp Warning.
Display Background
* 1
: You can set the screen background
to Black , Blue , or Logo when no image signal is available.
Startup Screen
* 1
: Set to On to display the User's Logo
when projection starts.
A/V Mute
* 1
: You can set the screen displayed when the
remote control's [A/V Mute] button is pressed to Black ,
Blue , or Logo .
User's Logo *1 You can change the user's logo that is displayed as a
background during Display Background, A/V Mute, and so
on.
s
"Saving a User's Logo" p.78
Projection
Select from one of the following projection methods
depending on how the projector is installed.
Front
,
Front/Ceiling
,
Rear
, and
Rear/Ceiling
You can change the setting as follows by pressing down
the [A/V Mute] button on the remote control for about five
seconds.
Front
W
Front/Ceiling
Rear
W
Rear/Ceiling
s
"Installation Methods" p.24
Submenu Function
Operation
Direct Power On : Set to On to turn on the projector
simply by plugging it in.
When the power cord is plugged in, note that the projector
turns on automatically in cases such as a power outage
being restored.
High Altitude Mode : Set to On when using the projector
above an altitude of 1500 m.
Startup Source Search : Set to On to project images from
the port currently receiving an image when the projector
starts. Set to
Off to project images from the same source as
the last time the projector was used.
Auto Power On : (Only available when Standby Mode is set
to Communication On .) If this is set to Computer1 , the
projector turns on when signals are received from the
Computer1 port, even when the projector is in standby
mode.
List of Functions
107