Epson Disc Producer PP-100AP Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 112

background image

Important Notice and Safety Instructions

9

❏

Take care not to spill liquid on the product.

❏

Do not use aerosol products that contain flammable gases inside or around this
product. Doing so may cause fire.

❏

Always turn the product off using the

P

power button. When this button is pressed, the

power light flashes. Do not unplug the product or turn off the power to the outlet

until the

power light stops flashing.

❏

Leave the ink cartridges installed. Removing the cartridges can dry out the print head
and may prevent the product from printing.

❏

Be careful not to trap your fingers when closing the disc cover.

❏

The product uses galvanized sheet metal, and this may cause rusting at the edges;
however, this does not cause any harm to the function of the product.

❏

Do not place any drink or liquid on the product as penetration by liquid inside the
product will cause a malfunction.

❏

When you have opened the disc cover while running a job (busy indicator is flashing),
make sure that internal light has turned off and that the arm has stopped moving before
performing any operation such as loading or taking out discs. Do not put your hands
inside the product or operate stackers while the arm is moving. Also, open and close
the disc cover gently.

❏

The product cannot be used as a shared printer using the Windows sharing setting.

Handling Ink Cartridges

Observe the following when handling the ink cartridges:

❏

Keep ink cartridges out of the reach of children. Do not allow children to drink from or
handle the cartridges.

❏

Do not shake ink cartridges; this can cause leakage.

❏

Be careful when you handle used ink cartridges, as there may be some ink remaining
around the ink supply port. If ink gets on your skin, wash the area thoroughly with soap
and water. If ink gets into your eyes, flush them immediately with water. If discomfort or
vision problems remain after a thorough flushing, see a doctor immediately.

❏

Do not remove or tear the label on the cartridge; this can cause leakage.

❏

Install the ink cartridge immediately after you remove it from its package. If you leave a
cartridge unpacked for a long time before using it, normal printing may not be possible.

«
...
7
8
9
10
11
...
»

Содержание Disc Producer PP-100AP

















































































































Отзывы:

Нет отзывов

Похожие инструкции для Disc Producer PP-100AP

Бренд: ABB Страницы: 66

Бренд: Maco Страницы: 38

Бренд: Direct IP Страницы: 76

NI WLS/ENET-9163

Бренд: National Instruments Страницы: 36

Бренд: A4Tech Страницы: 7

Бренд: Hama Страницы: 6

Бренд: National Instruments Страницы: 130

Бренд: Rane Страницы: 128

Бренд: Acard Страницы: 34

Бренд: Shure Страницы: 113

Бренд: Paradyne Страницы: 6

Бренд: mikroElektronika Страницы: 2

Бренд: Kontron Страницы: 32

Бренд: Netopia Страницы: 138

Бренд: Westermo Страницы: 22

Бренд: R.V.R. Elettronica Страницы: 171

RJModem MT5656RJ

Бренд: Multi-Tech Страницы: 27

Бренд: IEI Technology Страницы: 106

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды