Epson ColorWorks CW-C6000 Series Скачать руководство пользователя

Страница: 15 / 83

Before use

Cautions on the Maintenance Box

CAUTION

Store in a place out of reach of children. Do not drink any adhered ink.

Do not disassemble or modify the maintenance box.

Doing so may cause ink to get into eyes or onto skin.

Do not touch the IC chip on the maintenance box.

If a maintenance box that can still be used has been removed and left detached for a
long period of time, do not reuse it.

Do not peel off the film from the top surface of the maintenance box.

If ink contacts your skin, eyes, or mouth, take the following actions.



When ink gets onto your skin, immediately wash the area with soap and water.



When ink gets into your eyes, immediately flush them with water. Leaving the ink as is
may result in bloodshot eyes or mild inflammation. If something is wrong, immediately
consult with a doctor.



When ink gets into your mouth, immediately spit it out and consult with a doctor.

Do not shake a used maintenance box too hard. The ink may leak from the
maintenance box if you shake it around too much or push the sides strongly.

Avoid storing the maintenance box under high temperatures or in a frozen state.

Keep it away from direct sunlight.

Содержание ColorWorks CW-C6000 Series




















































































Результаты поиска

Содержание ColorWorks CW-C6000 Series

Отзывы:

Похожие инструкции для ColorWorks CW-C6000 Series

Бренды по названию

Популярные бренды

Epson ColorWorks CW-C6000 Series, Руководство пользователя

Результаты поиска

Содержание ColorWorks CW-C6000 Series

Отзывы:

Похожие инструкции для ColorWorks CW-C6000 Series

Бренды по названию

Популярные бренды