Epson ColorWorks CW-C6000 Series Скачать руководство пользователя | Manualshive

Страница: 83 / 83

background image

Appendix

83

Restriction of Use

When this product is used for applications requiring high reliability/safety such as transportation devices related
to aviation, rail, marine, automotive etc.; disaster prevention devices; various safety devices etc.; or functional/
precision devices etc., you should use this product only after giving consideration to including fail-safes and
redundancies into your design to maintain safety and total system reliability. This product is not intended for use
in applications requiring an extremely high level of reliability and safety, such as in aerospace instruments, main
communication equipment, nuclear power control equipment, or medical equipment, etc. Please make your own
judgment on this product's suitability after a full evaluation.

Notes

(1) All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or

transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without the prior written permission of Seiko Epson Corporation.

(2) The content of this manual is subject to change without notice.

(3) While every precaution has been taken in the preparation of this manual, Seiko Epson Corporation assumes

no responsibility for errors or omissions.

(4) Neither is any liability assumed for damages resulting from the use of the information contained herein.

(5) Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third

parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident,
misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or
(excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance
instructions.

(6) Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options

or any consumable products other than those designated as Genuine Epson Products or Epson Approved
Products by Seiko Epson Corporation.

Trademarks

Microsoft®, Windows®, Windows Vista®, and Windows Server® are registered trademarks of Microsoft
Corporation in the United States and/or other countries.

EPSON and EXCEED YOUR VISION are registered trademarks of Seiko Epson Corporation.

Other product names and company names are the trademarks or registered trademarks of their respective
companies.

©Seiko Epson Corporation 2019-2020. All rights reserved.

«
...
81
82
83

Содержание ColorWorks CW-C6000 Series




















































































Отзывы:

Нет отзывов

Похожие инструкции для ColorWorks CW-C6000 Series

Бренд: Panasonic Страницы: 44

Бренд: Hamilton Beach Страницы: 2

Бренд: PROFILO Страницы: 20

Бренд: Saeco Страницы: 68

Бренд: Gaggia Страницы: 61

Бренд: Saeco Страницы: 96

Бренд: Russell Hobbs Страницы: 8

Бренд: Hamilton Beach Страницы: 24

Бренд: TEFAL Страницы: 56

Бренд: DèLonghi Страницы: 9

Бренд: Alpina Страницы: 39

Бренд: U-Line Страницы: 16

Бренд: Kenmore Страницы: 16

Бренд: Kenmore Страницы: 5

Бренд: Kenmore Страницы: 7

Бренд: Kenmore Страницы: 4

ELITE 1009101770A

Бренд: Kenmore Страницы: 12

Бренд: Kenmore Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды