Epson ColorWorks CW-C6000 Series Скачать руководство пользователя | Manualshive

Страница: 12 / 83

background image

Before use

12

Cautions on Power Supply

CAUTION

Before moving the product, shut down and unplug the product, and make sure that
all the cables are disconnected.

Failure to do so may damage a cable, causing electric shock or fire.

Do not store or transport the product while it is tilted, standing, or upside down.

Doing so may cause the ink to leak.

Do not remove the paper cover when using the product.

Doing so may result in normal operation and printing becoming no longer possible.

WARNING

Do not allow dust or other foreign material to adhere to the power plug.

Doing so may cause electric shock or fire.

Do not use a power cord other than that supplied with the product. In addition, do not
use the supplied power cord with another device.

Doing so may cause electric shock or fire.

Do not use a damaged power cord.

Doing so may cause electric shock or fire.
Contact qualified service personnel for advice if the power cord is damaged.
Furthermore, observe the following points so as not to damage the power cord.



Do not modify the power cord.



Do not place heavy objects on the power cord.



Do not forcibly bend, twist, or pull the power cord.



Do not lay the power cord near a heating appliance.

Do not insert or remove the power plug with a wet hand.

Doing so may cause electric shock.

Do not connect many power cords to one outlet.

Doing so may cause fire.
Supply power directly from a power outlet.

Regularly disconnect the power plug from the outlet and clean the base of the prongs
and between the prongs.

Leaving the power plug connected to the outlet for a long period of time may cause dust to
accumulate on the base of the power plug prongs, resulting in a short and fire.

Hold the plug and do not pull the cord when disconnecting the power plug from the
outlet.

Pulling the cord may damage the cord or deform the plug, causing electric shock or fire.

CAUTION

To ensure safety, unplug the product before leaving it unused for an extended period.

«
...
10
11
12
13
14
...
»

Содержание ColorWorks CW-C6000 Series




















































































Отзывы:

Нет отзывов

Похожие инструкции для ColorWorks CW-C6000 Series

Бренд: Omcan Страницы: 12

Бренд: Petra electric Страницы: 32

Бренд: Scotsman Страницы: 39

WHI CAFFE CHP-5230S

Бренд: Chungho Страницы: 36

Бренд: Capresso Страницы: 2

Бренд: Qilive Страницы: 96

Moderna+ICE CLBL720SCIC

Бренд: BRIO Страницы: 13

Multi-Capsule CM2000

Бренд: Sunbeam Страницы: 16

Vip Line Elizabeth-PL92T

Бренд: Lelit Страницы: 30

Бренд: Ernesto Страницы: 2

Бренд: Kalorik Страницы: 17

Бренд: Oursson Страницы: 18

Бренд: Bartscher Страницы: 93

Бренд: CombiSteel Страницы: 18

TAS 40xxGB Series

Бренд: Tassimo Страницы: 30

Бренд: OBH Nordica Страницы: 36

Бренд: SIMAG Страницы: 45

Бренд: Microcom Страницы: 104

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды