Epson C11CJ81201 Скачать руководство пользователя страница 68

Страница: 68 / 126

5. Enter the following information for the port name and then click

\\Name of computer connected to the target printer\name of shared printer

6. After returning to the

Printer Ports

window, click

Cancel

7. Check that the name you entered for the port has been added and selected, and then click

Close

Installing the printer driver from the CD-ROM

This section describes how to install the printer driver in the clients when the computers of the
server and clients use different OS.

The on-screen displays on the following pages may differ depending on the version of Windows
OS.

Note:

❏

When installing the printer driver in the clients, you must access with the Administrator.

❏

If the computers of the server and clients have the same OS and the same architecture, you do not
have to install the printer drivers from the CD-ROM.

1. Access the shared printer and a prompt may appear. Click

, and then follow the on-screen

instructions to install the printer driver from the CD-ROM.

LQ-780/LQ-780N User’s Guide

Printer Software

Содержание C11CJ81201































































































































Результаты поиска

Содержание C11CJ81201

Отзывы:

Бренды по названию

Популярные бренды

Epson C11CJ81201, Руководство пользователя

Результаты поиска

Содержание C11CJ81201

Отзывы:

Бренды по названию

Популярные бренды