❏
The binding area should be flat and have no creases.
❏
The sprocket holes should be a circle or a notched circle.
❏
The sprocket holes of all sheets in the form should be aligned properly.
❏
The binding position should be outside the printable area. See “Printable area” on page 119 for
more information.
Labels
❏
Labels should be securely attached to the backing sheet and the label surface must be flat.
❏
The labels should not peel off their backing sheet under the conditions below.
wrapping drum radius:
27 mm
wrapping angle:
180 ˚
wrapping time:
24 hours
ambient temperature:
40 ˚C
ambient humidity:
30%
1. label
2. 27 mm
❏
When using labels whose backing sheet is entirely covered, make sure the cuts around the
edges of the labels are perforated.
1. backing sheet
2. label sheet
3. several uncut areas on each side
4. label
LQ-780/LQ-780N User’s Guide
Product Information
117
