Control Panel
Buttons and Lights
Note:
The control panel is designed to easily convey functions and operations.
Single button operations:
The
Tear Off
(
o
),
LF/FF
(
d
),
Load/Eject
(
u
), and
Pause
(
) buttons are designed to
perform common paper operations.
Button combinations:
Activate [
Menu
] and [
Reset
] by using a combination of button operations.
Functions mode:
Activate [
Font
] and [
Micro Adjust
] by holding down the
button for three
seconds.
1
Font
lights (Blue)
One of the lights turns on when the power is on. The lighting pattern indicates
the font that is selected on the printer.
2
Tear Off
light (Blue)
Flashes when continuous paper is in the tear off position.
3
[
Font
]
(Functions mode)
Hold down the
button for three seconds to enter [Font] select mode, and
then press the
o
button to change the font settings.
For details, see “Selecting a Font and Menu” on page 19.
4
Tear Off
button (
o
)
(Single button)
Advances continuous paper to the tear off position.
Feeds continuous paper backward from the tear off position to the top-of-form
position.
5
[
Menu
]
(Button combinations)
Press both button
o
and
d
at the same time, the printer enters or exits the
Default Setting mode and you can set the various printer settings. For details,
see “About Your Printer’s Default Settings” on page 20.
LQ-780/LQ-780N User’s Guide
Printer Basics
16
