Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer, Руководство по обслуживанию

Страница: 111 / 161

and Assembly
Service
3.2.5.6
Heat Roller Removal
1.
2.
3
4.
5.
6.
7.
8.
9.
10.
11.
12.
Remove the top cover. (Refer to Section 3.2.1.2.)
Remove the fusing unit. (Refer to Section 3.2.5.1.)
Remove 2 CB screws
x 6) securing the inlet chute at the bottom of the fusing unit, and
remove the inlet chute.
Remove 2
screws x 8) securing the fusing unit top cover, and remove it.
Remove 2 screws
x
8) securing the fusing unit cover R, and remove it.
Remove 2 screws
x
8) securing the fusing unit cover L, and remove it.
Remove the pressure roller. (Refer to Section 3.2.5.2.)
Remove the eject chute. (Refer to
3.25.3.)
Remove the heater. (Refer to Section 3.2.5.5.)
Remove the H/R ring securing the right side of the heat roller, and remove the H/R gear.
Remove the heat roller along with the left H/R ring and H/R bearing L.
Remove the H/R ring and H/R bearing L from the heat roller.
o
H/R
Bearing
ear
H/R
Figure 3-42. Removing the Heat Roller
Ring
3-26
Rev.