manualshive.com logo in svg

Epson Apex 286/12, Руководство пользователя, Страница: 67 / 128

Поделиться
Скачать
Epson Apex 286/12 Скачать руководство пользователя страница 67

A hard disk must be formatted before it can be read from or written to.

If  

your hard disk requires this, you should carry out the following steps.

3-3 Hard Disk Drive Format

Step 1 

—

Preformat

The preformat utility is supplied by the system BIOS. You can press

<Esc> 

key quickly just after the RAM test to enter the SETUP program.

Choosing item 2 from the initial screen to preformat hard disk. See
Figure 3-l.

Step 2 — Partition

This process creates DOS partitioning on a preformatted hard disk
five. The DOS command “FDISK” handles this partitioning process.

Insert your DOS diskette in drive A and type a: to get A prompt. Then
type:

A> FDISK 

The “FDISK” command displays a serial of menus to help you partition
(our hard disk for MS-DOS, With the “FDISK” command, you can:

• 

create a primary partition,

• 

create an extended partition,

•

change the active partition,

• 

delete an partition,

• 

display partition data, and

• select the next fixed disk drive for partitioning on a system

with multiple fixed disks.

If your hard disk is 4OMB, you may have partitions of up to 33MB in
size. 33MB is the maximum space for a partition allowed by DOS.

For more information about how to use creating DOS partition, see
Appendix D in MS-DOS User’s Guide and Reference.

8

Chapter 3: Operating Your System

Содержание Apex 286/12

































































































































Отзывы:

Нет отзывов