Epson Apex 286/12 Скачать руководство пользователя страница 112

Страница: 112 / 128

6-5 Moving Your Computer and Peripherals

Your personal computer and its peripheral components are highly
sensitive machines that can be damaged easily through bad shipping

and handling. We recommend that you take the following steps before
moving the equipment to another location.

Short Move

An example of this is moving from one location to another in the same
building. Ensure that you have taken the following steps before

moving any items:

•

Be sure that all data in your hard disk is backed up onto flop-
py disks.

•

Enter the DOS system program and invoke the PARK com-
mand. This command will lock up your hard disk to protect it

from damage while the computer is being moved.

•

Turn off all power switches.

•

Insert the cardboard diskette/s supplied with the system unit
into the disk drive/s and close the disk drive levers.

•

Detach all cables and cords. Next, coil and tie them to
protect the connectors.

•

Move each item separately.

Long Move

This kind of move involves use of a motor or a vehicle to carry your

computer and its peripherals from one location to another. Before
moving any items, follow the instructions stated above. Next, repack
all items in their original packing cases.

Chapter 6: Appendix

Содержание Apex 286/12

































































































































Результаты поиска

Содержание Apex 286/12

Отзывы:

Epson Apex 286/12, Руководство пользователя, Страница: 112 / 128

Результаты поиска

Содержание Apex 286/12

Отзывы: