Epson Apex 286/12 Скачать руководство пользователя страница 122

Страница: 122 / 128

Glossary

Some of the terms you will come across frequently in this manual are
defined here.

add-on card

This card connects through expansion slots to the

motherboard. Also known as an adapter, an expansion
card or an interface card, this is used to increase the
capabilities of your computer.

address

- This is a value that is given to specific memory locations

so that data can be read or written. Make sure that
devices do not have the same address. Otherwise, there
will be an address conflict.

ASCll

- This is an acronym for the American Standard Code for

Information Interchange. The ASCII code includes both
control and graphic characters, and is used for exchang-
ing information between data-processing systems, data-
communication systems and related equipment.

asynchronous communication

- A type of information vehicle whereby data can be trans-

mitted at any time without requiring synchronized timing.

back up (v)

- To make a spare copy of a disk or of a file.

backup (n)

- A copy of a disk or file.

bank

- The area on a printed circuit board for RAM chips is

usually divided into rows. These are called banks.

Chapter 7: Glossary

Содержание Apex 286/12

































































































































Результаты поиска

Содержание Apex 286/12

Отзывы:

Epson Apex 286/12, Руководство пользователя, Страница: 122 / 128

Результаты поиска

Содержание Apex 286/12

Отзывы: