Epson ACULASER COLOR 1000, Руководство по обслуживанию

Страница: 39 / 230

EPSON AcuLaser C2000 / AcuLaser C1000 Revision E
Product Descriptions Control Panel (AcuLaser C2000) 39
OneTouch Mode 2 LED (F)
†
On: OneTouch mode 2 is enabled. The following 4
items can be set in this mode:
“RITech”, “Copies”, “Mp Tray Size”, “Toner Save
Mode”
SelecType Mode (G)
†
On: SelecType mode is enabled.
All LEDs
†
All LEDs come on when a service-call error has occurred.
1.4.2 Button Functions
(AcuLaser C2000)
On Line button (H)
When the printer is on-line, pressing this button puts the printer in off-line to
prevent printing. Pressed during panel setting mode, it immediately terminates
the setting mode and brings the printer back to on-line status.
Form Feed button (I)
If the Form Feed lamp is lit in off-line status, pressing this button causes the
printer to print a page of data. If data for multiple pages has been received, it is
printed. If the Form Feed LED is lit because the control codes are not
terminated, data received up to that point is printed. The printer does not eject
paper when the Form Feed LED is on.
Continue button (J)
While the Continue LED is on, pressing this button clears the error. Also, a
warning message indicated during on-line status can be cleared by pressing
this button.
SelecType button (K) (or Shift button)
Used to select OneTouch mode 1 / OneTouch mode 2 / SelecType mode, as
follows:
†
The first push of the button puts the printer in OneTouch mode 1.
†
Pressing this button in the OneTouch mode 1 puts the printer in OneTouch
mode 2.
†
Pressing this button in the OneTouch mode 2 activates the SelecType
mode to enter the initial level of SelecType mode. (The “Test Menu”
appears.)
Menu button (L)
†
Pressing this button activates the SelecType mode. The initial level of the
mode (“Test Menu”) appears. In the SelecType mode, this button is used
to select the setting menu, the primary level of the mode.
†
In OneTouch mode 1, used to select the value for “Paper Source”.
†
In OneTouch mode 2, used to select the item for “RITech”.
†
In SelecType mode, used to select the setting menu.
NOTE: If this button is pressed with the Shift button held down, setting
values and items scroll backward.
Item button (M)
Pressing this button brings up the item that was last selected.
†
In OneTouch mode 1, this button is used to select the value for “Paper
Size”.
†
In OneTouch mode 2, this button is used to select the value for “Copies”.
†
In SelecType mode, this button is used to select the setting item.
NOTE: If this button is pressed with the Shift button held down, setting
values and items scroll backward.