Epson ACULASER COLOR 1000, Руководство по обслуживанию

Страница: 19 / 230

EPSON AcuLaser C2000 / AcuLaser C1000 Revision E
Product Descriptions Controller Unit Specifications 19
Printing Speed*
1
First Printing Time
Warm-Up Time (TBD)
†
120 V: 150 sec. (Max.) (at 22°C, 55%RH, rated voltage)
†
220 - 240 V: 160 sec. (Max.) (at 22°C, 55%RH, rated voltage)
Paper Supply
*1:Excluding limits on printing speed described in “Restriction on Print-
ing Speed” on page 59.
Table 1-1. Printing Speed
Printing
mode
Speed mode
Single-sided printing
A4/LT/A5/B
Duplex printing
B/W
Standard mode 20 PPM 13 PPM
Half-speed mode 3.8 PPM
Color
Standard mode 5 PPM 5 PPM
Half-speed mode 2.4 PPM
Table 1-2. First Printing Time
Printing
mode
Speed mode
Single-sided printing A4/LT/A5/B Duplex printing
A4 LT/B A5 A4/LT
B/W Standard mode 16 sec. 16 sec. 16 sec. 25 sec.
Half-speed mode 29 sec. 28 sec. 28 sec.
Color Standard mode 25 sec. 25 sec. 25 sec. 37 sec.
Half-speed mode 38 sec. 38 sec. 37 sec.
Table 1-3. Paper Supply
Paper feed method Capacity Paper size Paper thickness
Standard tray *1
Standard universal
tray
150 sheets
Paper Width: 92 to 216 mm
Paper Length: 210 to 297 mm
60 to 90 g/m 2
(recommended paper, plain
paper)
10 sheets Envelope (TBD) *2 ---
50 sheets
92 x 148 to 216 x 297 mm
transparencies/labels/thick
paper
91 to 163 g/m 2
(thick paper, special paper)
Cassette unit
*3 *4
Standard cassette
500 sheets A4/LT 60 to 90 g/m 2
(recommended paper, plain
paper), transparencies
50 sheets Transparencies (TBD)
Optional Cassette
500 sheets A4/LT 60 to 90 g/m 2
(recommended paper, plain
paper), transparencies
50 sheets Transparencies (TBD)
*1: Paper size detection and near empty detection are not installed, paper out sensor installed. Paper existence is detected
when one sheet of paper (post card or a paper larger than A5T) is set.