Epson 6200L - EPL B/W Laser Printer, Справочное руководство

Страница: 403 / 513

386
Troubleshooting
Operational Problems
The Ready light (green) does not turn on when you turn the
printer on
Cause What to do
The printer may not be
connected to the electrical
outlet. Turn off the printer and check the power
cable connections between the printer
and the electrical outlet; then turn the
printer back on.
The electrical outlet may be
controlled by an outside
switch or an automatic timer. If the electrical outlet is controlled by an
outside source such as a wall switch,
make sure the switch is turned on or
plug another electrical device into the
outlet to check whether the outlet is
operating properly.
The Ready light (green) is on but nothing prints
Cause What to do
Your computer may not be
properly connected to the
printer. Perform the procedure described in
“Connecting the Printer to a Computer”
in the
Setup Sheet .
The interface cable may not be
plugged in securely. Check both ends of the cable between
the printer and the computer. Be sure to
secure the connector using the wire
retaining clips.
You may not be using the
correct interface cable. If you are using the parallel interface,
make sure you use a double-shielded,
twisted-pair interface cable no longer
than six feet in length.