Epson 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer, Руководство принтера

Страница: 141 / 160

6-141
Solving Problems | 141
Solving Paper Problems
If paper feed or paper jam problems occur frequently, try one or more of the
following solutions:
•
For roll paper, try adjusting the paper suction setting. See page 57 for
more information. You can also adjust this setting through your printer
driver.
•
For heavy or thick media, follow the instructions on page 44 to load the
media correctly.
•
Make sure the paper is not folded, wrinkled, or damp.
•
Make sure the printer’s environment falls within the required
temperature and humidity range.
•
Make sure the paper is not too thick or too thin. See pages 35 and
150 to 151 for paper specifications.
•
Make sure no foreign objects are inside the paper path.
•
Make sure the printer isn’t located in a brightly lit area. The paper
sensors may not operate correctly.
•
Make sure the
Media Type
and
Paper Source
settings in the printer
software are correct.
•
Make sure the platen gap setting is correct for the paper or media you’re
printing on. See page 56 for more information.
Printing is too slow.
◗
Turn on High Speed in your Advanced settings.
◗
Choose a lower resolution in your printer software for faster printing.
◗
Clear space on your hard drive or run a defragmentation utility.
◗
Don’t run too many applications at the same time.
◗
Turn off virtual memory.
◗
Add RAM to your system.
◗
Consider upgrading your system to support a faster connection to the printer:
either IEEE 1394 FireWire or USB 2.0.
Problem Solution
sp4800Guide.book Page 141 Tuesday, March 7, 2006 3:49 PM