Epson 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer, Руководство принтера

Страница: 108 / 160

5-108
108 | Maintaining and Transporting the Printer
7. Press the
Menu
button to display
AUTO
, then press the
Menu
button again. You see
UNI-D
(uni-directional). This is the type of
alignment to start with.
8. Press the
Menu
button again to start the alignment process.
It takes about 7 minutes to run the automatic uni-directional head
alignment. The printer’s white beam sensor reads the alignment pattern
and adjusts the printer automatically. Make sure you don’t open the top
cover or turn off the printer during this process.
9. When the uni-directional alignment is finished, press the button until
you see
BI-D 2-COLOR
. Then press the
Menu
button again to start
the bi-directional black alignment process, which is also completely
automatic and takes about 7 minutes.
10. When the bi-directional black alignment is finished, press the button
until you see
BI-D ALL
. Then press the
Menu
button again to start
the alignment process. Again, this process is completely automatic and
takes about 7 minutes.
11. When done, press the Pause button to exit the head alignment mode.
If you want to verify or fine-tune the automatic alignment process, you can
perform a manual head alignment. See your electronic
Reference Guide for
instructions.
sp4800Guide.book Page 108 Tuesday, March 7, 2006 3:49 PM