Epson 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer, Руководство принтера

Страница: 137 / 160

6-137
Solving Problems | 137
Your print has gaps or
appears faint.
◗
Check the expiration date printed on each of the ink cartridges. If the cartridge is
too old, replace it as described on page 109.
◗
Make sure the Media Type setting in the printer software is correct for the media
you’re printing on.
◗
Run a nozzle check and cleaning cycle (see page 104).
◗
Check the ink indicators and light and replace ink cartridges if your ink supply is low,
as described on page 109.
◗
The paper thickness setting is not correct for the paper you’re printing on. Use your
printer software (page 70 for Mac OS X or page 93 for Windows) to choose the
correct setting. When you’re done printing with a custom paper configuration, be
sure to return the setting to standard (
STD ).
◗
The platen gap setting is too wide. Use the Menu system to change the setting to
STANDARD , or to NARROW if printing on very thin paper. See page 56 for
instructions.
Your print appears
blurry or smeared.
◗
Make sure the Media Type setting in the printer software is correct for the media
you’re printing on.
◗
If you’re printing on non-Epson media, you may need to adjust the paper thickness
setting, drying time, or color density. Use your printer software (page 70 for Mac
OS X or page 93 for Windows) to choose the correct setting. When you’re done
printing with a custom paper configuration, be sure to return the setting to standard
(
STD ).
◗
Your paper doesn’t meet the required specifications or wasn’t stored in a dry,
humidity-free environment. Load new paper.
◗
If you’re using cut sheet media, make sure the printable side is face down in the
tray.
◗
Ink has leaked into the paper path. Wipe the paper path area of the printer with a
soft, clean cloth. See page 123 for cleaning instructions.
◗
Turn off High Speed in your Advanced settings.
◗
The platen gap setting is too narrow. Use the control panel to change the setting to
WIDE or WIDER . See page 56 for instructions.
◗
Run a nozzle check and cleaning cycle (see page 104).
Problem Solution
sp4800Guide.book Page 137 Tuesday, March 7, 2006 3:49 PM