Epson 1815p - PowerLite XGA LCD Projector, Руководство пользователя

Страница: 138 / 204

138
Managing Projectors
4. Highlight
On to receive email notifications, then
press
Enter
.
5. Enter the IP address for the SMTP server for the projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used:127.x.x.x,
224.0.0.0 to 255.255.255.255 (where x is a number from 0 to
255).
6. Enter the SMTP server’s port number. The default value is 25.
You can enter a numeric value from 1 to 65535.
7. Choose one of the
Destination Address
fields, then enter the
e-mail address where you want to receive a message when a
problem occurs. You can register up to three addresses. You can
enter up to 32 alphanumeric characters for the e-mail address.
8. Select problems or warnings to be notified about by mail.
(Numbers 1 through 3 in this section correspond to the e-mail
addresses you entered.)
9. When you’re done making all necessary changes, select
Return
,
select
Setup complete
, and then select
Yes
to confirm that you
want to save the changes. Press
Menu
to exit the menu system.
When the selected problem or warning occurs, an e-mail message is
sent to the specified notification addresses. The subject line of the
e-mail is
EPSON Projector
. The e-mail includes the following
information:
■
Line 1: The name of the projector where the problem has
occurred
■
Line 2: The IP address of the projector where the problem has
occurred
■
Line 3: Details of the problem
note
If a critical problem develops
with a projector which
causes it to suddenly stop
working, it may not be
possible for the projector to
send a message.
If Standby Mode is set to
Network On in the
Extended menu, the
projector can still be
monitored even if the
projector is in standby mode
(when the power is off).