Epson 1520 - Stylus Color Inkjet Printer, Руководство пользователя

Страница: 161 / 290

Setting Options
Skip over perforation Off, On
Auto tear off Off, On
Banner mode Off, On
Parallel I/F transfer
rate Fast, Normal
* IBM mode only
For details, see “About the default settings” below. To change a
setting, see “Changing the default settings” on page 8-10.
Note:
Most software controls the character table and auto line feed. If your
software controls these features, you may never need to set them with
the control panel.
About the default settings
Print direction
Your printer has three direction settings: Uni-D, Bi-D, and Auto.
Note:
Most software controls this setting. If your software does, you may
never need to set it with the control panel.
Auto switches the printer automatically between bidirectional
(for text data) and unidirectional (for graphics data) printing.
Bi-d causes the print heads to print in both directions. This
provides the fastest printing. If vertical or horizontal lines are
not aligned, align the print heads as shown on page 10-40. If
you can’t use the calibration utility, you will need to align the
print heads using the print head alignment mode.
Uni-d causes the print heads to print in one direction only. This
provides maximum alignment for both graphics and character
printing.
8
R
Loire2 Ref. Guide
Rev.c
A5 size Chapter 8
11-11-96 DR, pass 0
The Control Panel 8-5