Epson 1010, Руководство пользователя, Страница: 107 / 279

The Graphics Command
The graphics mode command is quite different from the other
commands used by the printer. For most of the other printer modes,
such as emphasized and double-width, one ESC code turns the
mode on and another turns it off. For graphics, the command is more
complicated because the code that turns on a graphics mode also
specifies how many columns it will use. After the printer receives
this code, it interprets the numbers that follow as pin patterns and
prints them on the paper.
Your printer has one command that allows you to use any of the 11
graphics options. The format of the command is:
ESC* m n1 n2 data
In this command,
m
selects the graphics option and n1 and n2
specify the number of columns to reserve for graphics. The available
graphics options are listed below.
Option Pins m
Horiz. density
dots/in.
Single-density
8
0 6 0
Double-density
8 1 1 2 0
High-speed double-density*
8 2 1 2 0
Quadruple-density*
3 3 2 4 0
CRT I
8 4 8 0
CRT II
8 4 9 0
Single-density
2 4
3 2
6 0
Double-density
2 4
3 3 1 2 0
CRT III
2 4 3 8 9 0
Triple-density
2 4 3 9 1 8 0
Hex-density*
2 4
4 0
3 6 0
*
Adjacent dots cannot
be
printed in this mode.
Software and Graphics
4-11