Assembly instructions
(Original)
BT / BM / BF Gearboxes
Doc. No. : 1002
Version 1 dated 18/10/2018
Page 4/11
2.2
Target group
This documentation is intended for qualified trained personnel who are familiar with
mechanical assembly work. Assembly, commissioning and maintenance may only be
carried out by accordingly qualified personnel. Technical training or safety instruction
is required.
2.3
Scope
The scope of these instructions covers the following products of the company EGT
Eppinger Getriebe Technologie GmbH:
•
BT Bevel gearboxes
•
BM Bevel gearboxes
•
BF Bevel gearboxes with motor flange
All mounting parts necessary for the assembly, installation, operation and mainte-
nance, which are included in the scope of supply of these gearboxes, are also within
the scope of this document.
2.4
Intended use
Eppinger gearboxes are machine elements for converting or diverting torques and
rotational speeds within the respectively specified performance range. Any operation
outside the specified performance characteristics or other than the specified use is
not permitted. The permissible torques and rotational speeds of the gearboxes must
not be exceeded. The forces affecting on the gearbox shafts have to be limited to the
maximum permissible values.
Unauthorised modifications or alterations to the product are not permitted.
According to the EC Machinery Directive 2006/42/EC, gearboxes are referred to as
machine components and are therefore assemblies that do not fall within the scope
of the Machinery Directive 2006/42/EC. Therefore, gearboxes are components to be
installed in machines. The commissioning is forbidden until by or after the integration
into the end product, the requirements of the machine directives are met.
2.5
Contact
EGT EPPINGER Getriebe Technologie GmbH
Breitwiesenweg 2-8
