manualshive.com logo in svg

EPOX EP-D3VA, Руководство пользователя, Страница: 66 / 90

Поделиться
Скачать
EPOX EP-D3VA Скачать руководство пользователя страница 66

HPT370 UltraDMA-100 & RAID

Page 66

Block Size

This option sets the block sizes that the array will create to organize the data. It is
recommended to keep the default of 64K selected.

Start Creation Process

This is the final step in the RAID array creation. After you have confirmed your
mode and drives use this option to create the array. Warning this will destroy all
previous data on the drives selected. The creation will only take a moment and
will bring the user back to the main menu. At this point the array is created and
should now be partitioned and format for operating system use.

Once created the array will be given a name by the utility. If this is the first array
in the system it will be named Array #0. A second array in the system will be
named Array #1 and so forth.

2. Delete RAID

Select item 2. Delete RAID from the main menu to erase a RAID array currently
in the system. Upon closing this option the Channel Status window will be
displayed along with a set of parenthesis next to any arrayed drives. Only the first
drive of the array will have the parenthesis. Use the arrow keys to move the cursor
to the desired drive. Press the <Enter> key to select it. You now will be prompted
by a warning message. If you are sure you want the array removed press <Y>. The
array is now removed and the drives have all been separated into individuals.
Drives that were originally stripped may now have their data corrupted.

3. Duplicate Mirror Disk

Select item 3. Duplicate Mirror Disk from the main menu to create an exact copy
of one drive to another. Both drives should be identical size, model, and type.
Upon selecting this option you will be shown the following three choices.

1. Select Source Disk
2. Select Target Disk
3. Start Duplication Process

Содержание EP-D3VA



























































































Отзывы:

Нет отзывов