EPOX EP-D3VA, Руководство пользователя, Страница: 31 / 90

Software
2=CA!
8. Click on “Update Driver...” or “Change Driver...” button.
9. Click on the "Next" button.
10. There is a window that ask you "Do you want Windows to do?", choose
"Display a list of all the driver in a specific location, so you can select
the driver you want" then click on the "Next" button.
11. There is a Window listing hardware types, select the "SCSI controllers"
then click on the "Next" button.
12. Put the install diskette into the drive A: and then click on the "Have
Disk..." button.
13. Key in Path “A:\Win” than click on the “OK” button.
14. Click on the "OK" button.
15. Click on the "Next" button.
16. If there is a window showing the settings (resources) to be used by the
driver, then click on the "Next" again. At this point, the system will
install the driver.
17. Click on the "Finish" button.
18. Then the system will ask you to restart the system. If the settings
reported in step 15 are not what set on the host adapter, you must adjust
the settings by using the device manager in the System control panel
before restarting your computer.
5. Install HighPoint (HPT370) Disk Array monitoring utility (OPTIONAL).
Located on the Driver Disk or CD-ROM in the HPT370\UTIL folder is an
utility that reports information about the status of any RAID array created by the
HighPoint controller. Use SETUP.EXE in HPT370/UTIL to install. .
6: Install Video Card’s driver.
7: Install DirectX. This is available from Microsoft at http://www.microsoft.
com.
8: Congratulations basic installation complete! You now may continue to install
any additional drivers for other devices. At this time you may wish to check for
any devices listed with question marks (?) in the Device Manager [Control
Panel / System icon] that had no drivers built-in during Windows installation.