EPOX EP-D3VA, Руководство пользователя, Страница: 55 / 90

BIOS setup
2=CA##
Soft-Off by PWRBTN: Use this to select your soft-off function. The default is
Delay 4 sec.
Instant Off: Turns off the system instantly.
Delay 4 Second : Turns off the system after a 4 second delay. If momentary
press of button, the system will go into Suspend Mode.
Press the power botton again to take system out of Suspend
Mode.
Wake Up Events:
VGA: When set to On (default), any event occurring at a
VGA port will awaken a system which has been
powered down.
LPT & COM: When set to On (default), any event occurring at a
COM(serial)/LPT (printer) port will awaken a
system which has been powered down.
HDD & FDD: When set to On (default), any event occurring at a
hard or floppy drive port will awaken a system
which has been powered down.
DMA/master: When set to On (default), any event occurring to
the DMA controller will awaken a system which
has been powered down.
Wake Up On LAN/
Modem Ring Resume:
When set to Enabled, any event occurring to the
Modem Ring will awaken a system which has
been powered down.
RTC Alarm Resume: When set to Enable rtc alarm resume, you could
set the date (of month) and timer (hh:mm:ss), any
event occurring at will awaken a system which has
been powered down.
Primary INTR: When set to On (default), any event occurring at
will awaken a system which has been powered
down.
IRQs Activity Monitoring: Allows user to set system to monitor IRQs 3-15
for activity to awaken system from a power
management mode.