EpiSensor ZDR-10, Руководство пользователя

Страница: 10 / 37

remote override. Or if the event
ends and the system is configured to
Auto Exit
26 Demand Response Notifies that a demand response
event is currently in progress. Will be
reset either by the manual override
push button, or remote override. Or
if the event ends and the system is
configured to Auto Exit
1/0 1 Interval
and Delta - Read Only
359 Switch The position of the switch. Writing 1
to the switch initiates a DR Event,
while writing 0 to the switch ends a
DR Event. Note that the switch could
be ON, when no event is in progress
if the system is waiting for a manual
Exit. 1/0 1 Interval
and Delta - Read/Write
User Interface Sensors
These sensors provide data on the state of the user interface and can be used to trigger state changes at the
NOC or for audit/compliance purposes.
Sensor ID Data Feed Description Unit Resolution Reporting Default
Read/Writ
e
41 Key Switch The position of the key switch. 1 =
Armed, 0 = Not Armed - 1 Interval
and Delta - Read Only
42 Exit Button The position of the Exit Button, 1 =
pressed, 0 = released - 1 Interval
and Delta - Read Only
250 Enter Event Value An Echo of the Enter Event Value
Property 6501 which allows this to
be exported as a Sensor in the
normal fashion - 1 Snap to
Clock - Read Only
251 Exit Event Value An Echo of the Exit Event Value
Property 6502 which allows this to
be exported as a Sensor in the
normal fashion - 1 Snap to
Clock - Read Only
Electricity Metering Sensors
These read-only ‘sensors’ provide data on the power consumption and frequency of the 3-phase system that the
ZDR is monitoring.
Sensor ID Data Feed Description Unit Resolution Reporting Default
Read/Writ
e
300 Phase A kWh Phase A kWh value. This is a
continually increasing kWh reading. kWh 0.01 Off - Read/Write
301 Phase B kWh Phase B kWh value. This is a
continually increasing kWh reading. kWh 0.01 Off - Read/Write
Page 10
​
of 37