Firmware Updates
The firmware of the ZDR can be updated both locally (via a serial communications cable) and over-the-air via the
ZigBee wireless network.
Important Note
All parts of the circuit within the enclosure must be considered to be at dangerously high
mains voltage when the unit is connected to a mains voltage source.
For detailed instructions on updating the ZDR (and other EpiSensor nodes) over-the-air please refer to the
document “How to Bootload on a Live Gateway” (EpiSensor Document Ref.
).
For additional advice and support, please email [email protected]
Hardware Features
This section has an overview of the various features / components of the ZDR. For more detailed information on
any part, please email [email protected]
Page 18
of 37