manualshive.com logo in svg

Epiroc SB 1102, Инструкция по безопасности и эксплуатации

Поделиться
Скачать
Epiroc SB 1102 Скачать руководство пользователя страница 17

Safety and operating instructions

© Construction Tools PC AB | 9800 1273 01 | 2020-04-03

Original Instructions

17

5.6.1.3 Blunt tool

• Very good energy ap-

plication

• Optimum breaking ef-

fect

• No torsion effect

5.6.2 Changing the working tool

 

WARNING

 

Running engine

Changing the inserted tool or accessories while the car-

rier's engine is running can cause serious injury.

u

Secure the carrier against involuntary activation.

 

WARNING

 

Working tool can be heavy

If the working tool is falling down, it can result in material

damage and personal injury.

u

Always lift the working tool in a safe way.

1. Shut the carrier's engine off.

2. Dismount the working tool, use a lifting strap to re-

duce the risk of personal injury.

3. Remove and check the lock buffer. Change worn or

damaged parts.

NOTICE

 The lock buffer in the tool retainer lock is

made of plastic and can melt when operating in a hot

environment. If this occurs, change the standard lock

pin. Find optional spring pin in the spare parts list.

4. Clean and lubricate the bushing plentifully.

NOTICE

 When mounting a new working tool, it is es-

pecially important to lubricate plentifully.

5. Mount the working tool, use a lifting strap to reduce

the risk of personal injury

6. Rotate the working tool to spread the grease.

7. Mount the tool retainers, one at the time.

8. Drive in the lock pin until the lock buffer attaches in

the lock pin groove.

Содержание SB 1102

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды